PA Electronic Reverb Control
(320-1107)              Care and Maintenance          Faxback Doc. # 32638

Your Radio Shack PA Electronic Reverb Control is an example of superior
design and craftsmanship.  The following suggestions will help you care
for your reverb so you can enjoy it for years.

    Keep the reverb control dry.  If it gets wet, wipe it dry immediately.
    Liquids might contain minerals that can corrode the electronic
    circuits.

    Use and store the reverb control only in normal temperature
    environments.  Temperature extremes can shorten the life of electronic
    devices, damage batteries, and distort or melt plastic parts.

    Handle the reverb control gently and carefully.  Dropping it can
    damage the circuits boards and can cause it to work improperly.

    Keep the reverb control away from dust and dirt, which can cause
    premature wear or parts.

    Wipe the reverb control with a damp cloth occasionally to keep it
    looking new.  Do not use harsh chemicals, cleaning solvents, or strong
    detergents to clean it.

    Use only a fresh battery of the required size and type.  Always remove
    old or weak batteries.  They can leak chemicals that destroy electronic
    circuits.

Modifying or tampering with the Electronic Reverb Control's internal
components can cause a malfunction and might invalidate its warranty.
If your reverb control is not performing as it should, take it to your
local Radio Shack store for assistance.


(LB/all-05/09/96)

Privacy Policy