CFD-550 CD Radio Cassette-Corder
(140-8011) CD Operation Faxback Doc. # 31739
PLAYING A CD (normal play)
You can operate the CD cassette-corder from the deck or with supplied
remote commander. Also, you can play 12 cm (5 inch) and 8 cm (3 inch) CDs
without an adapter.
1. Turn on the power and press CD.
If there is no disk in the compartment "no disc" appears in the
display window.
2. Press PUSH OPEN to open the disc compartment.
3. Holding the CD by the edge, place the CD in the disc compartment with
the label side up.
4. Close the compartment lid.
The number of tracks on the disc and the total playing time appear in
the display window.
5. Press > PLAY/PAUSE.
The CD player will play all the tracks once. The track number and
playing time appear in the display window.
Between tracks, the remaining time before the next track is displayed.
6. Adjust the volume and sound emphasis (see "Adjusting the Sound
Emphasis" on Faxback Doc. # 31743).
(Be careful not to turn up the volume excessively while listening to a
portion with very low audio input. If you do, the speakers may be
damaged when a peak level plays.)
To Press
Remote Deck
Stop play [] [] STOP
Pause || >|| PLAY/PAUSE
Resume play after pause || > PLAY/PAUSE
Remove the CD -- First [] STOP, then
PUSH OPEN
Turn off the power POWER POWER
CHECK THE REMAINING TIME
To display Press
Remaining time on the current track DISPLAY/ENTER once during
playing
Remaining time on the CD DISPLAY/ENTER twice during
and the number of tracks left. playing
NOTES: If the disc has 21 tracks or more, the remaining time appears as
"- - -:- - ".
During repeat play or program play, the remaining time in the disc
cannot be displayed even if you press DISPLAY/ENTER.
PLAYING SPECIFIC TRACKS
You can find the beginning of a track or a point in a track while the
player is playing or paused. Find a particular track by specifying the
track number.
To find the beginning of a track
To find Press*
The beginning of the |<< once
current track
The beginning of the |<< repeatedly
previous tracks
The beginning of the next >>| once
track
The beginning of the >>| repeatedly
succeeding tracks
* If one of the following indications is displayed, press the STOP button
to clear the indication: INTRO, REP 1, REP ALL, SHUF REP, PGM REP, PGM.
To find a point in a track
To search Press down
Remote Deck
By listening for the point << or >> |<< or >>|
you want to hear in play mode in play mode
By observing the << or >> |<< or >>|
time counter
TO LISTEN TO A SPECIFIC TRACK
Press the number buttons on the remote commander for the track you want to
hear. Play starts immediately. To play tracks with numbers equal to or
greater than 10, press +10 first, then the number buttons 1 to 0. (See
the examples below.)
Example:
To play from the 10th selection
Press +10 > 0
Display | - 10
To play from the 33rd selection
Press +10 > +10 > +10 > 3
Display | - 2- 3- 33
PLAYING THE BEGINNING OF EACH TRACK (intro scan)
You can sample the first 10 seconds of each track on a CD.
1. Press CD.
2. Press PLAY MODE once to display "INTRO" while the player is stopped.
3. Press > PLAY/PAUSE.
The first track plays for ten seconds. The player then skips to the
next track to be played.
TO START PLAYING A TRACK
Press |<<.
To cancel intro scan
Press any button for CD operation except DISPLAY/ENTER and > PLAY/PAUSE.
PLAYING TRACKS REPEATEDLY
You can play tracks repeatedly in normal, shuffle or program play modes.
In shuffle play, the tracks play in a different order each time. Repeat
only one track or all the tracks.
Repeating a single track
1. Press PLAY MODE until "REP 1" appears in the display window.
2. Choose the track you would like repeated with |<</>>| AMS/SEARCH.
3. Press > PLAY/PAUSE.
The track selected plays repeatedly.
Repeating all the tracks
1. Press PLAY MODE until "REP ALL" appears in the display window.
2. Press > PLAY/PAUSE.
The player begins playing at the first track. When all the tracks have
played once, the player starts playing from the first track again.
Repeating tracks in random order
1. Press PLAY MODE until "SHUF REP" appears in the display window.
2. Press > PLAY/PAUSE.
The SYMBOL indication appears in the display window, and then the
player plays all the tracks repeatedly in different orders.
NOTE: When you press |<<, the CD returns to the beginning of the current
track only.
REPEATING PROGRAMMED TRACKS
1. Press PLAY MODE until "PGM REP" appears in the display window.
2. Choose a track with |<</>>| AMS/SEARCH.
3. Press DISPLAY/ENTER to store the track.
4. Repeat steps 2 and 3 to program tracks in the order you want them
played.
Up to 34 tracks can be programmed.
5. Press > PLAY/PAUSE.
The tracks play repeatedly in the order programmed.
To Press
Stop play STOP
Cancel repeat play PLAY MODE until no indication appears in the display
window.
PLAYING TRACKS IN THE DESIRED ORDER (program play)
Program the CD cassette-corder to play tracks in any order you choose.
You can also use the remote commander for this.
1. Press CD.
2. Press MODE until "PGM" appears in the display window.
3. Press the number buttons on the remote commander for the tracks you
want played in the order you want them played.
Up to 34 tracks can be programmed.
If you make a mistake
Press DISPLAY/ENTER on the deck once and re-enter the track number.
4. Press > (play).
The tracks play in the order programmed.
To Press
Stop play STOP
Cancel program MODE until no indication appears in the display
play window
PLAYING TRACKS IN THE DESIRED ORDER (program play)
To check the order of programmed tracks
Press DISPLAY/ENTER on the deck. With each press, the selections appear
in the programmed order.
To change the order of the tracks:
To change the order of the tracks, you must erase the current program
and create a new one.
To erase the current program:
Press STOP once or open the disc compartment if the CD is stopped. The
current program will be erased.
Follow the steps in Playing tracks in the Desired Order to create a new
program.
To program the tracks on the deck
Press |<</>>| AMS/SEARCH to select the track you want to program, and
then press DISPLAY/ENTER. Repeat this procedure for up to 34 tracks.
(EB 2/23/96)
Privacy Policy