D-844K Sony Car Discman
(420-5057)                 Installation               Faxback Doc. # 31575

Connecting to other stereo equipment

You can listen to the CD through other stereo equipment or record a CD on a
cassette tape.  Refer to the instruction manual of other equipment for
details.  Before making connections, turn off each equipment.  (See Faxback
Doc. # 31509, Fig. B for connections).

To connect an equipment without LINE IN nor REC IN jack, use the RK-G134
connecting cord and connect to MIC jack.

NOTES:  Before you play the CD, turn down the volume of the connected
        equipment so as not to damage the connected speakers.

        To output the original sound, cancel the DSP and surround functions
        (see "Using other Functions" on Faxback Doc. # 31574).

Installing in a Car

Where to place your Discman

Install the Discman in a location which:

     Does not interfere with your driving.

     Is not dangerous for passengers.

    Does not interfere with the glove box lid or ashtray.

     Is stable, and where nothing around it may interfere with
     installation.

Do not install the Discman near heat sources or where subject to direct
sunlight, excessive dust, or moisture (especially on a dashboard.)

Please understand that we will not incur any obligations for troubles
caused by incorrect installation.

Mounting your Discman

Attach the Discman to the console box with the supplied Velcro tapes.

NOTE:  When you are going to park your car for a long period of time,
       remove the Discman from the Velcro tapes so that it will not be
       exposed to direct sunlight.

To route the cord

Use the supplied spiral tube to route the cords so that they do not
interfere with your driving.

NOTE:  The 4.5V DC plug supplied with car battery cord conforms to the
       proposed standards of the Electronic Industries Association of Japan
       (EIAJ).  Do not connect it to other Discman.

Polarity of the plug (EIAJ standards): center point positive ( + ).


(EB 3/27/96)

Privacy Policy