Stereo Mixer
(320-1200)                  Operation                  Faxback Doc. # 31284

Cueing

1.  Plug a set of headphones into the headphone jack.

2.  Adjust the headphone listening level with the monitor level control.

3.  Select the input to be cued using the PHONO1/TAPE or PHONO2/AUX switch
    and press the appropriate Cue button that is in the ON position.

4.  Make sure the input you have selected is off in the main output, by
    setting the appropriate glide path control to 0 or by moving the fader
    control to the position away from the selected input.

5.  Input the cued source.  You will hear the cue signal in the left side
    of the headphones and the main output in the right side.

6.  When you hear the desired section of the cued material, increase its
    volume control to the proper level (or move the fader to the opposite
    position).


(IR-03/11/96)

Privacy Policy