CD Radio Cassette-Corder
(140-0544) The CD Player Faxback Doc. # 19553
PLAYING MULTIPLE DISCS
You can play up to 6 CDs one after another.
1. Press one of the DISC 1 to 6 buttons to select the disc tray.
2. Press /\ OPEN/CLOSE on the player and place a CD on the disc tray.
3. Press /\ OPEN/CLOSE on the player to close the disc tray.
The number of the disc tray where the CD is inserted appears in the
display. To insert more discs, repeat steps 1 to 3.
4. Press DISC MODE to select "ALL DISCS."
5. Press one of the DISC 1 to 6 buttons to select the disc you want to
start playing.
Play starts from the selected CD and the indicator of the selected
disc tray blinks slowly.
NOTE: Place one CD only on the disc tray. If you place two or three CDs
and close the disc tray, you will not be able to pull out the tray.
TIP: To play only one CD, press DISC MODE to select "1 DISC."
USING THE DISPLAY
You can check information about the disc by using the display.
Checking The Total Track Numbers and Playing Time
Press DISPLAY in stop mode.
If the disc has more than 16 tracks, "OVER 16" appears in the display.
Checking The Remaining Time
Press DISPLAY while playing a disc.
The track numbers in the music calendar disappear after they are
played.
To display Press DISPLAY
___________________________________________________________
Remaining time on the Once
current track*
___________________________________________________________
Remaining time on the disc Twice
and the number of tracks left**
___________________________________________________________
Playing time and the current Three times
track number
___________________________________________________________
* For a track whose number is more than 16 the remaining time appears as
"--:--".
** If the remaining tracks are over 99, "--" appears instead of the track
number. If the remaining time is over 99 minute, "--:--" appears
instead of the remaining time.
LOCATING A SPECIFIC TRACK
You can quickly locate any track using the number buttons. You can also
find a specific point in a track while playing a disc.
To Locate Press
______________________________________________________________
a specific track directly one of the DISC 1 to 6
buttons to select the disc
and a number button of the
track.
______________________________________________________________
a point while listening to >> (forward) or <<
the sound (backward) while playing
and hold down until you
find the point.
______________________________________________________________
a point while observing >> (forward) or <<
the display (backward) in pause and
hold down until you find
the point.
When you use the buttons
on the player, use |<</>>|
AMS/SEARCH.
______________________________________________________________
Locating A Specific Disc By Scanning The First Track Of Each Disc
1. Press STOP PLAYBACK (button with a square).
"CD" appears in the display.
2. Press DISC MODE to select "ALL DISCS."
3. Press DISC SCAN on the player.
The player starts scanning the first track of each disc for 10 seconds.
Scanning always starts from the disc in DISC 1 no matter what disc
number is selected.
NOTE: You cannot start play if "PGM" or "SHUF REP" is lit in the display.
Turn off the indication by press STOP PLAYBACK.
TIP: When you locate a track numbered over 10, press > 10 first, then the
corresponding number buttons.
Example: To play track number 23, press >10 first, then 2 and 3.
PLAYING TRACKS REPEATEDLY (Repeat Play)
You can play tracks repeatedly in normal, shuffle or program play modes,
see below.
Playing Discs Repeatedly Using ONE-TOUCH CD RELAY Buttons
Press either CONTINUE or SHUFFLE.
To play all CDs repeatedly Press
______________________________________________________________
In numerical sequence CONTINUE. "ALL DISCS REP ALL"
appears in the display.
______________________________________________________________
In random order SHUFFLE. "ALL DISCS SHUF REP ALL"
appears in the display.
______________________________________________________________
Playing Tracks Repeatedly
1. Press PLAY MODE/MONO/ST until the repeat mode you want appears
in the display.
To repeat Select
______________________________________________________
a single track REP 1
______________________________________________________
all the tracks REP ALL
______________________________________________________
tracks in random order SHUF REP ALL
______________________________________________________
programmed tracks PGM REP and then program
tracks (see steps 3-5, below).
_______________________________________________________
2. Do either of the following to start repeat play:
* When you've selected REP1, select the disc by pressing one of the
DISC 1 to 6 buttons, then select the track by pressing the
number button.
* When you've selected REP ALL, press DISC MODE to select "ALL DISCS"
(to repeat all discs) or "1 DISC" (to repeat only 1 disc). If you
select "1 DISC," then press one of the DISC 1 to 6 buttons to
select the disc you want.
* When you've selected SHUF REP ALL, press DISC MODE to select "ALL
DISCS" (to repeat tracks in all discs in different order) or
"1 DISC" (to repeat only one disc in different order). Then,
press >.
* When you've selected PGM REP ALL, press >.
CREATING YOUR OWN PROGRAM
You can make a program of up to 20 tracks from all the CDs in the order
you want them to be played.
1. Press PLAY MODE/MONO/ST until "PGM" appears in the display.
2. Press DISC MODE to select "ALL DISCS".
3. Press one of the DISC 1 to 6 buttons to select the disc tray.
4. Press the number buttons for the tracks you want to program in the
order you want. You can program up to 20 tracks. Programmed tracks
appear in the music calendar.
If you made a mistake, press CLEAR and re-enter the track number.
To program additional tracks from another disc, repeat steps 3 and 4.
5. Press > to start program play.
TIPS: You can select the track on the player. Press |<</>>| AMS/SEARCH,
then press ENTER/MEM instead of the number buttons.
You can program one whole CD as one program step. Repeat step 3 and
select another disc tray by pressing one of the DISC 1 to 6 buttons.
To Cancel Program Play
Press PLAY MODE/MONO/ST until no indication appears in the display.
To Check The Order Of Tracks Before Play
Press >> /PEM CHECK on the remote or ENTER/MEM on the player.
Every time you press the button, the track number appears in the
programmed order.
To Change The Current Program
To Do This
_______________________________________________________________
Erase the last track in 1. Press CLEAR. Every time you
the program press the button, the last
track in the program is
cleared.
2. Re-enter the track numbers.
_______________________________________________________________
Change the whole Press STOP PLAYBACK. Then create
program completely. a new program following the
programming procedure.
_______________________________________________________________
TIPS: You can play the same program again, since the program is saved
until you open the disc tray.
You can record your own program. After you've created the program,
insert a blank tape and press REC to start recording.
(CS 2/26/96)
Privacy Policy