AMX-14 (400-1386) Installation Faxback Doc. # 16471
MOUNTING THE SPEAKERS ON A PERSONAL COMPUTER
For the best stereo effect, follow these steps to mount these speakers on
either side of your video monitor.
1. Loop the mounting strap around the monitor so the brackets are
positioned on either side of the monitor and there are no twists in the
strap. Then buckle the ends of the strap together. Pull the loose
ends of the strap to tighten the brackets to the monitor.
2. Peel off one side of the backing paper from the adhesive antivibration
sponge and past a sponge at the top and bottom of each metal bracket.
3. Secure the speakers to the mounting brackets using the supplied screws
and washers.
MOUNTING THE SPEAKERS ON A WALL
Follow these steps to mount the speaker son a wall using the supplied
brackets.
1. Remove the buckle from one end of the strap, then remove the strap from
the brackets.
2. Secure the brackets to the wall, using screws and anchors appropriate
for the mounting surface.
3. Secure the speakers to the mounting brackets using the supplied screws
and washers.
CONNECTING TO YOUR AUDIO SYSTEM
Follow these steps to connect your portable radio, tape player, CD player,
or CD ROM player to the speaker system.
1. Plug the supplied patch cord's white RCA plug into the INPUT L jack on
the back of the main speaker. Then connect the red RCA plug to the red
INPUT R jack.
2. Press the satellite speaker's red (+) lever, insert the end of the
striped black wire into the connector's hole, then release the lever to
secure the speaker wire.
3. Press the satellite speaker's black (-) lever, insert the end of the
solid black wire into the connector's hole, then release the lever to
secure the speaker wire.
4. Plug the patch cord into your audio source's audio output jack.
CAUTION: Do not connect other speakers to the main speaker.
CONNECTING AC POWER
After you make all other speaker connections, connect the AC plug to a
standard AC outlet.
(ALL-08/14/95)
Privacy Policy