20-Watt AC/Mobile PA Amplifier
(320-2041) Specifications Faxback Doc. # 15379
Output Power at 4 Ohms 1 kHz, 10% THD:............................20 Watts
Power Bandwidth at 5W, 10% THD, Aux Input:...................150 Hz-20 kHz
T.H.D at 10W, 1 kHz with 30 kHz Low Pass Filter
MIC 1:............................................................0.22%
MIC 2:............................................................0.21%
AUX.CD:................................1..........................0.20%
PHONO:............................................................0.24%
Input Sensitivity at 10% THD, 1 kHz
MIC 1:...........................................................2.5 mV
MIC 2:...........................................................2.5 mV
AUX CD:..........................................................150 mV
PHONO:...........................................................2.5 mV
Signal to Noise Ratio (Input Shorted) with 30 kHz Low Pass Filter
MIC 1:............................................................60 dB
Mic 2:............................................................60 dB
AUX.CD:...........................................................65 dB
PHONO:............................................................60 dB
Frequency Response at 4 Ohms +1/-3 dB
MIC 1:....................................................150 Hz-15 kHz
MIC 2:....................................................150 Hz-15 kHz
AUX.CD:...................................................150 Hz-15 kHz
PHONO (RIAA 100 Hz/10 kHz):...........................+11.9 dB/-12.1 dB
Hum and Noise at 4 Ohms with 30 kHz Low Pass Filter
at Master Volume Min:..............................................3 mV
at Master Volume Max and Others Min:..............................30 mV
Impedance
MIC 1:.........................................................32 kOhms
MIC 2:.........................................................25 kOhms
Phono:.........................................................88 kOhms
CD/Line:.......................................................25 kOhms
Tone Control (High Cut at 10 kHz):..................................-15 dB
Power Requirement:...........................................120V AC 60 Hz
Dimensions (HWD):................................3 x 11 1/4 x 8 3/4 inches
Weight:............................................................7.7 lbs
Specifications are typical; individual units might vary. Specifications
are subject to change without notice.
(br/ir-05/07/96)
Privacy Policy