In this tutorial we will show you how to set up for surround sound on the RCAź 100W Home Theater Receiver. To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly important when using the Dolby* Digital and DTS** surround mode. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers). Below is a picture of part of the remote control. The numbers on the remote represent each step and what buttons you will push for that step.
For additional information on this product, see the links below:
|Step 1: Turning on the Receiver|
|Press RECEIVER POWER to turn the power on. The STANDBY indicator goes out.|
|Step 2: Starting Receiver's Surround Setup Mode|
|Press RECEIVER. This button switches the remote to the receiver's surround setup mode.|
|Step 3: Initiating Setup Mode|
|Press LEFT or RIGHT arrow keys to
select the mode you want to set. For best results, start with "SPEAKERS setting
mode" and make your initial adjustments in the order described below. The current
settings are displayed automatically. Click on the links below for more information.
|Step 4: Selecting a Setting|
|Press the UP or DOWN arrow keys to
select the setting your want. The setting is entered automatically. The setting mode
automatically exits if no operation is performed within 20 seconds.
Repeat Steps 3 and 4 to set other surround modes.
*"Dolby" is a trademark of Dolby
**"DTS" is a trademark of Digital Theater Systems, Inc.
Copyright© RadioShack Corporation 2002. All rights reserved.