VGM-500  (250-4095)                Safety              Faxback Doc. # 6877

Operate the monitor from the power source indicated on the back of the
cabinet. Using a different power source can cause the monitor to operate
improperly and might damage the monitor.

To ensure safe operation, you must insert the monitor's three-pin plug
into a grounded standard three-pin outlet.

Use only three-wire extension cords that are correctly wired to provide
connection to ground. Improperly wired extension cords are a major cause
of fatalities.

The fact that the equipment operates satisfactorily does not ensure a
grounded power point or a completely safe installation. For your safety,
consult with a qualified electrician if there is any doubt about the
effective grounding of the power point.

To prevent a fire or electric shock, do not overload wall outlets and
extension cords.

Adjust only those controls that are described in "Adjusting the Display".
Improper adjustment of other controls can result in damage that will
require the service of a technician.

Do not allow anything to rest on the power cord. The cord should not
stretch across a hall or any other high-traffic area.

Unplug the monitor from the AC outlet if you do not plan to use it for an
extended period of time, such as during a weekend or vacation.

To prevent electric shock and other hazards, do not remove the monitor's
back cover.

Do not drop or push objects in the cabinet openings. Some internal parts
carry hazardous voltage, and contact with these can result in electric
shock.

Never spill a liquid of any kind on the monitor. If liquid is accidentally
spilled on the monitor, unplug it and have it checked by a Radio Shack
service technician before using it again.

(tlc-07/01/93)

Privacy Policy