VGM-100  (25-4040)             Specifications          Faxback Doc. # 6062

CRT........................................... 14 inch, 90 deg. deflection
Display Size...................................................9" x 6 3/4"
Input Signal........................... Separate Sync, Analog Video Signal
Input Level................................ Video: 0.7 peak-to-peak analog
                                             Sync: TTL Level
Scanning Frequency:
   Horizontal....................................................31.47 kHz
   Vertical.................................................59.95/70.08 Hz

Video Response................................. More than 30 MHz (at -3dB)
Cabinet Dimensions..........................13" x 13 1/4" x 12 3/4"(HxWxD)
Weight........................................... Approx. 17 lbs. 13.8 oz.
High Voltage...................................................12kV normal
Power Supply.............................................. 120 VAC, 60 Hz.
Power Consumption........................................... 50 Watts Max.
Heat Output..................................................... 171 BTU/H
Connector..................................................15 pin, D-shell

NOTE:  VGA Monochrome Monitors do not have a Dot Pitch Specification.

Your new display monitor is a solid-state monitor designed to display the 
signal from personal computers or other signal sources.


*   A stable display that is not affected by variations in the power source
    voltage.

*   Good overall display quality 

*   Circuits that create an extremely sharp and steady display

*   Low distortion which is achieved using a linearity-compensating coil

*   An Instant Action System that immediately activates the display when 
    you turn on the monitor 

*   Outstanding performance and reliability

Note:  The VGM 100 is designed for computers with a VGA adapter.

Privacy Policy