IBM G42 Monitor
(250-0466) Specifications Faxback Doc. # 50752
Tube type and size 14" Conventional
Viewable image size 13.2"
Dot pitch (mm) 0.28
Frame rate 50 - 120Hz
Line rate 30 - 50KHz
Maximum pixel rate 65MHz
Anti-reflective/anti-static Yes
Tilt/swivel base Yes
VESA power management Energy Star
MPR-II compliant Yes
VESA DDC Plug & Play enabled 1 & 2B
Digital control Yes
Brightness/contrast Yes
Horiz./vert. Adjust Yes
Picture height/width Yes
Reset to factory presets Yes
Pincushion Yes
Trapezoid Yes
Factory/User modes 8/8
Preset non-interlaced modes (VESA)
640 x 480 60, 72, 75, 85Hz
800 x 600 60, 75Hz
1,024 x 768 60Hz
Dimensions (HWD) 14.4" x 14.0" x 15.7"
Weight 26 lbs.
Power supply 100-240V AC, 50- 60Hz
Limited Warranty 1 year
The G42 has preset VESA modes and refresh rates for flicker-free operation.
It also supports the standard 85Hz refresh rate, creating a clearer image on
the screen and increasing user comfort. User-defined settings are placed in
memory.
The G42 complies with ISO 9241 Part 3, the international standard covering
front-of-screen ergonomics, so it's exceptionally easy on the eyes. And IBM
is the first manufacturer in the world to test complete systems and certify
compliance through a Supplier's Declaration.
VESA DDC 1 and 2B Plug and Play technology eliminates hassles related to
setup and installation by automatically configuring the monitor to your
system.
Compatibility
Restrictions:
Supported display modes do not all run at the high refresh rates necessary
for flicker-free performance. Display modes at lower refresh rates are
available for compatibility with older video adapters and system units and
will not be ISO compliant., -Supported display modes are a function of the
attaching system unit. The full range of display modes available with
these monitors may not be available or supported with all combinations of
system units, their operating systems, and application software.,
-Horizontal and vertical sync signal timings are critical in order to
achieve acceptable screen images. As a consequence, support for all
possible variations in H/V sync timings for any display mode cannot be
stated., -Adjustment of the user controls to enlarge the image to its
maximum size requires that the signal timings of the display mode being
used lie fully within the monitor timing specifications., -The number of
colors shown in any display mode is not limited by the monitor but depends
upon the capabilities of the adapter the monitor is attached to.,
-Implementation of monitor power management follows the Video Electronics
Standards Association (VESA) Display Power Management Signaling (DPMS)
standard. This standard must also be implemented in the attaching system
unit hardware and software for monitor power management to be effective.
The system implementation must provide user-adjustable, power-down delay
periods. The monitor power management function is invoked only after
appropriate signals are received from an attached system unit or video
adapter., -Implementation of monitor Plug and Play follows the VESA Display
Data Channel (DDC) standard. This standard must also be implemented in
the attaching system unit hardware and software for monitor Plug and Play
to be effective., -Certain functions require that the system unit to which
the monitor is attached be similarly configured, therefore, not all monitor
functions will be enabled when attached to all system units., -The 64KB
color depth mode is not supported on the Netfinity 7000 system.
Product approvals/certifications:
C-tick (Australia), CCIB/CCEE (China), CE, CSA C22.2 No. 950 (Canada),
DEMKO, DNHW (Canada), EN 55022 Class B (Europe), FCC Class B (US), FDA/DHHS
(US), GS (Germany), ICES-003 Class B (Canada), Korean, NEMKO, New Zealand,
NOM (Mexico), SASO, SEMKO (Sweden), South Africa, TUV, UL-1950 First
Edition, VCCI Class 2 (Japan)
RDS 11/30/98
Privacy Policy