Tandy FP 215 260-1193 Cables

FP 215  (260-1193)             Interface               Faxback Doc. # 5916

The Plotter is equipped with a serial interface and a parallel interface.
Either can be selected as desired by a built-in selector switch.

NOTE: When a serial interface and a parallel interface are connected at the
same time, the XY PLOTTER does not move.

Connector and Cable

(1) Connector
    1) Parallel
       Plotter side:              36-pole connector (female)
                                  (57L-40360-27C)
                                  (Manufactured by Daiichi Denshi
                                  Kogyo or equivalent)

       Cable side:                36-pole connector (male)
                                  (57l-30360-D8)
                                  (Manufactured by Daiichi Denshi
                                  Kogyo or equivalent)

    2) Serial
       Plotter side:              4-pin DIN receptacle
                                  (TCS +440)
                                  (Hoshiden Co., Ltd.)

       Cable side:                4-pin DIN plug
                                  (TCP 0546-01-010)
                                  (Hoshiden Co., Ltd.)

(2) Cable

    For noise control, twisted pair cables should be used, with a maximum 
length of 1m.

(jej 04/26/94)