LP 8
(260-1168) Settings Faxback Doc. # 5825
The function switches can be found inside the printer behind the front
panel control switches (ON-LINE / OFF-LINE, etc.).
SETTINGS Power Switch ON
OnLine/OffLine Switch to ONLINE
Set Dip Switch (8 Position Switch)
Dip Switch *=Standard Configuration (Parallel)
(8 Position) ?=Does NOT Matter Serial Mode Only
1 ? OPEN 8 Bit Serial Interface
CLOSED 7 Bit Serial Interface
2 ? OPEN 1200 BPS Serial Interface
CLOSED 600 BPS Serial Interface
3 * OPEN Parallel Interface
CLOSED Serial Interface
4 * OPEN CR Code Gives Carriage Return + Line
Feed
CLOSED CR Code Gives Carriage Return Only
5 * OPEN All CR Codes Received are Generated
CLOSED CR Code After Initial CR Code is
Ignored
6 OPEN LF Code Gives Line Feed Only
* CLOSED LF Code Gives Line Feed + Carriage
Return
7 * OPEN Normal ASCII Character at 91 - 95 Dec
CLOSED Changed Over ASCII at 91 - 95 Dec
8 * OPEN European Symbol at 160 - 191 Dec
CLOSED Japanese KANA at 160 - 233 Dec
INTERNAL DIP SWITCH SETTINGS:
--------------------------------------------
|SWITCH| SYMBOL | Off | On |
--------------------------------------------
|1 | Serial Bit Set| 8 | 7 |
|2 | Baud Rate | 1200 | 600 |
|3 | Interface | Paral. | Serial |
|4 | CR/NL | CR | CR+LF |
|5 | CCR/CR | Active | CR |
|6 | NL/LF | CR+LF | LF |
|7 | Codes | Tandy | Ascii |
|8 | Char.Set | Europ. | Kana |
--------------------------------------------
(smm 08/04/93)
Privacy Policy