Tandy CGP-220 260-1268 Settings

CGP-220  (260-1268)          Settings                  Faxback Doc. # 5808

DSW1 Switch information is to correct the timing of the forward and back-
ward direction printing in the printing operation.  This information is 
provided in the Service manual.

             SETTINGS  Turn Power ON
                       Open Paper Cover
                       Press and Hold Pump Switch for 1 Second
                       Release Pump Switch
                       WAIT for ALERT Indicator to stop Blinking
                       (Alert Indicator Will Blink for About 10 Seconds)
                       Set Pump Switch to Position 3
                       Close Paper Cover
                       Set OnLine/OffLine Switch to ONLINE
                       Function Dip Switch 1 (3 Position)
                       (Switch Used to Align Dots Vertically)
                        0   1   2   =  DELAY VALUE (micro-seconds)
                       ON  ON  ON   =  192
                       OFF ON  ON   =  224
                       ON  OFF ON   =  256
                       OFF OFF ON   =  288
                       ON  ON  OFF  =  320
                       OFF ON  OFF  =  352
                       ON  OFF OFF  =  384
                       OFF OFF OFF  =  416


(smm 08/04/93)