LP 1  (260-1150/52)                Features            Faxback Doc. # 5656

The modular constructed Line Printer is a low speed, unidirectional impact
printer. The machine is capable of printing 5 x 7 dot matrix characters at
densities of 10 to 16.5 characters per inch (cpi) for line lengths up to 
eight inches. Because of the fixed print head speed, the print rate in-
creases as the character density is increased. Print rate varies from 60 
characters per second (cps) at 10 cpi to 100 characters per second at 
16.5 cpi. Vertical line spacing is six lines per inch.

This manual provides installation and operating instructions for the Radio
Shack TRS-80 Line Printers (26-1150 and 26-1152). Each Line Printer uses a
different paper feed system. The 26-1150 uses a pinch roll paper feed for 
roll paper and the 26-1152 uses a tractor feed drive for multi-part 
(fanfold) paper. To use a Line Printer with the TRS-80 microcomputer 
system, you must have the TRS-80 Expansion Interface (26-1140,26-1141 or
26-1142). You received a telephone type cable (Interface Cable) with your 
Line Printer. Connect the Interface Cable as instructed. The manual also 
includes other information useful to the printer operator.

(dtc-08/04/93)

Privacy Policy