Tandy LMP 2150 260-1272 Cable Selection

LMP 2150  (260-1272)              Cables               Faxback Doc. # 5644

---------------------------------------------------------
|   COMPUTER                    | CABLE CATALOG NUMBER  |
---------------------------------------------------------
|   Model I (Exp.Interface)     |     26-1401           |
|   Model II/16/DT-1/12         |     26-4401           |
\   Model III/4                 |     26-1401           |
---------------------------------------------------------
Before making any connections between the Printer and TRS-80, be sure that
power to all units is off!

You must also be sure you have the correct cable for the TRS-80 if the
LMP-2150 is to operate properly. The following table describes the printer
cables the Radio Shack provides.

1. Attach the molded male end of the interface cable to the connector at the
   left rear of the Printer. It is important that you do not force the plug.
   If it doesn't fit one way, turn it over and try again.

2. Connect the other end of the cable to the printer jack of your computer.
   See your TRS-80 owner's manual for specific instructions.