Compaq Presario MV400 Monitor
(250-0603)          Installation Procedures           Faxback Doc. # 49306

The Compaq Presario MV400 Color Monitor comes with an installation diskette
so your monitor may operate optimally with your personal computer.  Most
newer models of Presario PCs include this software preinstalled at the
factory.

To determine whether you may need to install this software, please follow
steps 1-4 below:

NOTE: These 4 steps only apply to newer Compaq Presario computers.

1.  Close all open applications and, from the Windows desktop, click on
    Start, highlight Settings, and click on Control Panel.

2.  Double-click on the Display icon and click on the Settings tab.

3.  Click on Advanced Display Properties, click on the Monitor tab, and
    look for MV400.

4.  If you see MV400 in the Advanced Display Properties window, please
    click on Cancel.

Your monitor is already configured to operate optimally with your personal
computer.

If you did not see the MV400 in the Advanced Display Properties window,
please follow steps 5-14 below.

5.  Insert the monitor installation diskette in the diskette drive.

6.  From the Advanced Display Properties screen, with the Monitor tab
    selected, click on Change...

7.  From the Select Device screen, click on Have Disk...

8.  From the Install From Disk screen, please ensure that the drive letter
    is A:\.  If not, type A:\ in the dialog box.

9.  Click on OK and the software is saved on your hard drive from the
    diskette.

10. Remove the diskette from the diskette drive.

11. From the second Select Device screen, please select the MV400 Series
    and click on OK.

12. Click on Apply to save your settings.

13. Click on OK to accept the new settings.

14. Click on OK again to return to the Windows desktop.

Your monitor is now optimally configured to your personal computer.

(smm-08/14/98)