LP 1000   (260-2804)             Error Table           Faxback Doc. # 4724

When an error occurs, the operation panel indicators display an error code.
The following table shows the errors and their codes. For two-digit codes,
Indicator I alternately displays the digits with a brief blank interval
between the last and first digits.

 1=Offset Bar   2=Wrench   3=Paper Jam   4=Out of Toner   5=LED Indicator

    1  2  3  4   5  =  Errors
    -  0  -  -   0  =  Option Tray Hardware Error (NOT USED)
    -  0  -  -   1  =  Fusing Unit Error
    -  0  -  -   2  =  Optical Unit Error
    -  0  -  -   8  =  Main Motor Error
    -  0  -  -   F  =  Engine Drive Board CPU Error
    -  -  -  0   1  =  Maintenance Kit B Change
    -  -  -  0   2  =  Maintenance Kit A Change
    -  -  0  -   F  =  Paper Feed Error
    -  -  0  -   E  =  Paper Transport or Exit Jam
    -  -  -  -   P  =  Paper Size Error
    -  -  -  -   C  =  Option Tray Cover Open (NOT USED)
    0  0  -  -  71  =  Basic RAM Error
    0  0  -  -  73  =  CRC Error on Firmware ROM
    0  0  -  -  74  =  Timer/Interrupt Error
    0  0  -  -  27  =  CRC Error on all Resident ROM
    0  -  -  -  31  =  Option Ram Error
    0  -  -  -  41  =  Parallel Loopback Text Error
    0  -  -  -  13  =  Input Buffer Overflow
    0  -  -  -  15  =  Band too Complex to Print
    0  -  -  -  16  =  Page Exceeds Page Buffer Memory
    0  -  -  -  21  =  Not Enough Memory to Rotate Font
    0  -  -  -  22  =  Not Enough Memory for Bit Image Mode
    0  -  -  -  23  =  Not Enough Memory to Download Font
                       0=ON    -=OFF

(dkh-07/27/93)

Privacy Policy