DWP 210  (260-1257)        Ribbon Replacement          Faxback Doc. # 4594

    Fabric Cartridge (26-1458)
   Multi-Strike 3-Pak (26-1445) 

RIBBON CARTRIDGE INSTALLATION/REMOVAL

Radio Shack sells two Ribbon Cartridges for the DWP-210--a high-quality 
multi-strike Carbon Ribbon (26-1445) and a long life nylon Fabric Ribbon 
(26-1458). A Carbon Ribbon is included with you Printer, but no matter 
which Ribbon you choose to buy later on, you will find that they are both 
easy to install and remove.

TO INSTALL A RIBBON CARTRIDGE:

1. Before installing the Cartridge, remove all slack in the Ribbon by 
   turning the knob on the Cartridge in the direction indicated by the 
   arrow (counterclockwise).

2. Place the Cartridge on the carrier so that the  ribbon is between the 
   two guide plates, one each at left and right.

3. Gently press down on the Cartridge until it snaps into place.

4. Turn the knob by hand to check that the Cartridge is properly installed 
   and that the Ribbon feeds properly.

TO REMOVE THE RIBBON CARTRIDGE:

1. Open the Front Cover.

2. Gently press the Ribbon Cartridge Hold Hooks (left and right) outward.

3. Lift the end of the Cartridge with your thumb and remove the Cartridge.

(dtc-07/27/93)

Privacy Policy