DWP-210  (260-1257)              Hints                 Faxback Doc. # 4592

Using the DWP 210 with the TRS-80 Model II.

To use the DWP-210 with SCRIPSIT, type (at TRSDOS READY):

PATCH SCRIPSIT/SYS (R=175 B=22 F=0F C=FF)[ENTER]

You will also have to adjust the character width and the backspace
distance.  See the SCRIPSIT 2.0 reference manual for details.

Instead of the above procedure, users of SCRIPSIT 2.1 can use the PRTPCH
program provided with it.  Answer the prompts for the DWP-410 (this is
code-compatible with the DWP-210).

TRSDOS-II Users:

To use SCRIPSIT, type (at TRSDOS-II Ready):

DO DWP410 [ENTER]

Several PATCH COMPLETE message will appear.  To remove these patches so
that you can use other printers,type:

DO UNDWP410 [ENTER]

NOTE: If you are using TRSDOS-II on a hard disk system, you will need to
      insert your SCRIPSIT installation diskette into Drive 0 before doing
      the above patches.

(dtc-07/27/93)

Privacy Policy