DMP 2100P  (260-1274)          Features                Faxback Doc. # 4545

The DMP-2100P is a high-density dot matrix printer which can perform a
variety of different printing operations.

For instance, it can print:

* Correspondence characters (monospaced and proportional spaced).
* Standard characters (monospaced).
* Condensed characters (monospaced).
* Graphics characters.

For maximum efficiency, the DMP-2100P operates in three modes:

* Data Processing Mode for fastest output of program listings or data.
* Word Processing Mode for letter-writing or the creation of any text
  documentation.
* Graphics Mode (regular and high-resolution) for drawing pictures,
  figures, or graphs.

For word or data processing, you'll find the  DMP-2100P's Correspondence or
Proportional spaced characters (created on a variable n x 24 dot matrix)
can produce letter-quality results.

If, however, you need a print-out that is produced faster, Standard
characters (created on a 13 x 24 dot matrix) are just the thing for you!

In the regular Graphics Mode, you can use graphic data with a 3 x 3 dot
matrix to draw just about any type of graphic configuration you desire.

In addition, the DMP-2100P has the ability to print high-resolution dot
image graphics.  This is accomplished by using a high-resolution graphics
command and a 2/15" line feed command which can be used in any of the
three modes.

With your DMP-2100P, you can create your own font pattern for each of the
159 character codes and store this pattern as a font.  The function which
allows you this capability is called Down Line Loading (DLL).
(See chapter 8 and Appendix F for details.)

With the versatile DMP-2100P, you can determine not only character style
and printing mode, but you can also select the code set (control code
sequence) and character set.

CODE SET

* TRS (original) Code Set
* Code Set for IBM 80 cps Graphics Printers

(Refer to Appendix G for details.)

CHARACTER SET

* TRS Character Set
* IBM Character Set

(Refer to Appendix B for details)

You can use two types of paper with the DMP-2100P:

* Tractor-fed (4 to 15" wide) computer fanfold forms with guide holes.
  The Printer can also print on original and up to three non-carbon copies.
* Friction-fed single-sheet typewriter paper for use as an ordinary
  typewriter.

Other software-controlled features include:

* Bidirectional minimum-distance access carriage motion.
* Full or Half-Line Forward and Reverse (for printing above or below the
  current line) and 3/4 Line Feed.

* Underline capability.

and much more!

(dtc-07/26/93)

Privacy Policy