DMP 106 (260-2802) Codes Faxback Doc. # 4403
-------------------
|IBM CONTROL CODES|
-------------------
DEC. HEX. ASCII
----------------------------------------------------------------------------
00 00 NULL
Terminator
----------------------------------------------------------------------------
08 08 BS
Back Space
----------------------------------------------------------------------------
09 09 HT
Horizontal Tab
----------------------------------------------------------------------------
10 0A LF
Line Feed
----------------------------------------------------------------------------
11 0B VT
Vertical Tab (same as LF)
----------------------------------------------------------------------------
12 0C FF
Form Feed
----------------------------------------------------------------------------
13 0D CR
Carriage Return
----------------------------------------------------------------------------
14 0E SO
Double-Width Printing
----------------------------------------------------------------------------
15 0F SI
Select Compressed Mode
----------------------------------------------------------------------------
18 12 DC2
Select 10-pitch Mode
----------------------------------------------------------------------------
20 14 DC4
Stop Double-Width Printing
----------------------------------------------------------------------------
24 18 CAN
Clear Print Buffer
----------------------------------------------------------------------------
27+08 1B+08 ESC+BS
Backspace (same as BS)
----------------------------------------------------------------------------
27+09 1B+09 ESC+HT
Horizontal Tab (same as HT)
----------------------------------------------------------------------------
27+10 1B+0A ESC+LF
Line Feed (same as LF)
----------------------------------------------------------------------------
27+11 1B+0B ESC+VT
Vertical Tab (same as VT)
----------------------------------------------------------------------------
27+12 1B+0C ESC+FF
Form Feed (same as FF)
----------------------------------------------------------------------------
27+13 1B+0D ESC+CR
Carriage Return (same as CR)
----------------------------------------------------------------------------
27+14 1B+0E ESC+SO
Double-width Printing (same as SO)
----------------------------------------------------------------------------
27+15 1B+0F ESC+SI
Select Compressed Mode (same as SI)
----------------------------------------------------------------------------
27+18 1B+12 ESC+DC2
Select 10-pitch mode (same as DC2)
----------------------------------------------------------------------------
27+20 1B+14 ESC+DC4
Stop Double-width Printing (Same as DC4)
----------------------------------------------------------------------------
27+24 1B+18 ESC+CAN
Clear Print Buffer (same as CAN)
----------------------------------------------------------------------------
27+33 1B+21 ESC+!
Return to TANDY Mode
----------------------------------------------------------------------------
27+45+n 1B+2D+n ESC+-+n
Set Underline
n=1 Cancel Underline
n=0 Start Underline
----------------------------------------------------------------------------
27+48 1B+30 ESC+0
1/8" Line Feed Set
----------------------------------------------------------------------------
27+49 1B+31 ESC+1
7/72" Line Feed Set
----------------------------------------------------------------------------
27+50 1B+32 ESC+2
ESC A Execution
----------------------------------------------------------------------------
27+51+n 1B+33+n ESC+3+n
Variable Line Feed
LF = n/216"
----------------------------------------------------------------------------
27+52 1B+34 ESC+4
Set Top of Form
----------------------------------------------------------------------------
27+53+n 1B+35+n ESC+5+n
Set CR
n=0 CR = CR Only
n=1 CR = NL (CR + LF)
----------------------------------------------------------------------------
27+54 1B+36 ESC+6
Select Character Set 2
----------------------------------------------------------------------------
27+55 1B+37 ESC+7
Select Character Set 1
----------------------------------------------------------------------------
27+56 1B+38 ESC+8
Ignores Paper End
----------------------------------------------------------------------------
27+57 1B+39 ESC+9
Cancel Ignore Paper End
----------------------------------------------------------------------------
27+58 1B+3A ESC+:
Select 12 Pitch
----------------------------------------------------------------------------
27+60 1B+3C ESC+<
Home Head
----------------------------------------------------------------------------
27+65+n 1B+41+n ESC+A+n
Variable Line Feed
LF = n/72"
----------------------------------------------------------------------------
27+67+n 1B+43+n ESC+C+n
Set Lines Per Page
Form Length = n lines
----------------------------------------------------------------------------
27+67+0+n 1B+43+00+n ESC+C+NUL+n
Set Inches Per Page
Form Length = n inches
----------------------------------------------------------------------------
27+68+..+0 1B+44+..+00 ESC+D+..+NUL
Set Horizontal Tab Stops
----------------------------------------------------------------------------
27+69 1B+45 ESC+E
Set Emphasized Mode
----------------------------------------------------------------------------
27+70 1B+46 ESC+F
Cancel Emphasized Mode
----------------------------------------------------------------------------
27+71 1B+47 ESC+G
Set Double-Strike Mode
----------------------------------------------------------------------------
27+72 1B+48 ESC+H
Cancel Double-Strike Mode
----------------------------------------------------------------------------
27+74+n 1B+4A+n ESC+J+n
Variable Line Feed Execution
LF = n/216"
----------------------------------------------------------------------------
27+75+n1+n2 1B+4B+n1=n2 ESC+K+n1+n2
60 DPI Bit Image Mode
----------------------------------------------------------------------------
27+76+n1+2 1B+4C+n1+n2 ESC+J+n1+n2
120 DPI Bit Image Mode
----------------------------------------------------------------------------
27+77 1B+4D ESC+M
Select 10-Pitch Mode (same as DC2)
----------------------------------------------------------------------------
27+78+n 1B+4E+n ESC+N+n
Set Skip Perforation
----------------------------------------------------------------------------
27+79 1B+4F ESC+O
Cancel Perforation Skip
----------------------------------------------------------------------------
27+80+n 1B+50+n ESC+P+n
Set Proportional Spacing
n=0 Proportional Spacing Off
n=1 Proportional Spacing On
----------------------------------------------------------------------------
27+82 1B+52 ESC+R
Reset All Tabs
----------------------------------------------------------------------------
27+83+n 1B+53+n ESC+S+n
Set Superscript/Subscript Mode
n=0 Start Superscript Mode
n=1 Start Subscript Mode
----------------------------------------------------------------------------
27+84 1B+54 ESC+T
End Superscript/Subscript Mode
----------------------------------------------------------------------------
27+85+1 1B+55+n ESC+U+n
Set Unidirectional Printing
n=0 Cancel Unidirectional Printing (Bidirectional)
n=1 Start Unidirectional˙Printing
----------------------------------------------------------------------------
27+87+n 1B+57+n ESC+W+n
Set Double Width
n=1 Double Width Off
n=0 Double Width On
----------------------------------------------------------------------------
27+88+n1+n2 1B+58+n1+n2 ESC+X+n1+n2
Set Left/Right Margin
----------------------------------------------------------------------------
27+89+n1+n2 1B+59+n1+n2 ESC+Y+n1+n2
120 DPI Bit Image Mode in Normal Speed
----------------------------------------------------------------------------
27+90+n1+n2 1B+5A+n1+n2 ESC+Zn1n2
240 DPI Bit Image Mode
----------------------------------------------------------------------------
27+94+n 1B+5E+n ESC+^+N
Prints Characters below 20 Hex.
----------------------------------------------------------------------------
Other codes in Function Area
(01 to 1F and 7F hex.)
Ignored
----------------------------------------------------------------------------
(tlc-7/14/93)
Privacy Policy