DWP 410  (260-1250)         Pitch Settings             Faxback Doc. # 4379

SETTING THE PITCH

Be sure to set the Pitch Switch (on the Front Panel) to the position that
corresponds with the Print Wheel you are using.  That is, if you are using
a Courier 10 pitch Wheel, for example, set the Switch to 10; if you're
using a Madeleine Proportional Space Wheel, set the Switch to PS.

Do not accidentally bump the Pitch Switch during printing.  Unless you
change the Pitch via software, the current switch setting remains in
effect.  (Once you change the pitch via software, you must turn the Printer
OFF to use the Front Panel Switch.)

(css 07/27/93)

Privacy Policy