DMP 105 (260-1276) Control Codes Faxback Doc. # 4304
DEC. HEX.
Character Mode Graphic Mode Remarks
----------------------------------------------------------------------------
00 00
Ignored Ignored
----------------------------------------------------------------------------
01 01
Ignored Ignored
----------------------------------------------------------------------------
10 or 138 0A or 8A
Executive Line Feed 7/72" Line Feed *LF/NL selectable ***
(Executive LF in ac- (Executive) 8A
cordance with infor- Hex.: Printing
mation latched) data˙
----------------------------------------------------------------------------
13 or 141 0D or 8D
Carriage Return (When Carriage Return (When NL/CR Code Selectable
NL,LF pitch is latched NL,LF pitch is 7/72"
on). per line 8D hex:Printing
data.
----------------------------------------------------------------------------
14 0E
End Underline Ignored
----------------------------------------------------------------------------
15 0F
Start Underline Ignored
----------------------------------------------------------------------------
18 12
Select Graphics Mode Ignored
----------------------------------------------------------------------------
27 14 1B 0E
Start Elongation Start Elongation
----------------------------------------------------------------------------
27 15 1B 0F
End Elongation End Elongation
----------------------------------------------------------------------------
27 16 n1 n2 1B 10 n1 n2
Positioning (3 pitches Positioning (3 pitches n1,n2: Binary value ***
are available)(n1,n2 are available)(n1,n2
indicate dot position indicate dot position
from Home position.) from Home position.)
----------------------------------------------------------------------------
27 19 1B 13
Select Standard char- Ignored
acter
----------------------------------------------------------------------------
27 20 1B 14
Select Condensed Ignored
character
----------------------------------------------------------------------------
27 21 1B 15
Set CR=CR (No motion) Ignored
motion)
----------------------------------------------------------------------------
27 22 1B 16
Set CR=LF+CR (NL) Ignored
(No motion)
----------------------------------------------------------------------------
27 23 1B 17
Select Elite Character Ignored
----------------------------------------------------------------------------
27 28 1B 1C
Set Half Forward Line Ignored
Feed (No motion)
----------------------------------------------------------------------------
27 31 1B 1F
Start Bold Ignored
----------------------------------------------------------------------------
27 32 1B 20
End Bold Ignored
----------------------------------------------------------------------------
27 54 1B 36
Set Full Forward Line Ignored
Feed (No motion)
----------------------------------------------------------------------------
27 56 1B 38
Set 3/4 Forward Line Ignored
Feed (No motion)
----------------------------------------------------------------------------
27 85 0 1B 55 0
Select Bidirectional Ignored
Printing
----------------------------------------------------------------------------
27 85 1 1B 55 1
Select Unidirectional Ignored
Printing
----------------------------------------------------------------------------
27 90 n 1B 5A n
n/72" Forward Line Feed n/72" Forward Line Feed
(Executive) (Executive)
----------------------------------------------------------------------------
27 91 n 1B 5B n
Set n/72" Forward Line Ignored
Feed (No Motion)
----------------------------------------------------------------------------
28 n1 n2 1C n1 n2
Repeat Print Data (Un- Repeat Print Data (If
defined Code is changed MSB=0, Data is ignored)
to X)
----------------------------------------------------------------------------
30 1E
Ignored End Graphic Mode
----------------------------------------------------------------------------
Other Codes in Function Area (02 to 31 dec) (02 to 1F hex)
Prints "X" marks Ignored
----------------------------------------------------------------------------
Other Codes in Function Area (128-159, 192-223 dec.) (80 to 9F hex)
Prints "X" marks (Printing Data)
----------------------------------------------------------------------------
(tlc-7/8/93)
Privacy Policy