DMP 100  (260-1253)      Control Codes                 Faxback Doc. # 4266

DECIMAL   OCTAL       HEX             

10 or 13  012 or 015  0A or 0D   LF    Line feed. Prints out current buffer
                                 CR    contents and advance paper one line.

14        016         0E         SI    Disables underline printing

15        017         0F         SO    Enables underline printing

16 nn     020 nn      10  n      POS   Prints from (nn+1)th character
                                       position. nn is a sequence of the
                                       ASCII coded digits from 00 to 79
                                       inclusive.

18        022         12         DC2   Designates graphic mode.

26        032         1A         SUB   Carriage return. Prints buffer: next
                                       character will be printed at start  
                                       of line.

27 16 hl  033 020 hl  1B 10 hl   ESC   Prints from (hl+1)th dot position.
                                 POS   * See note below

28 aa     034 aa      1C aa      FS    Next graphic pattern is repeated for
                                       aa times. (0 < aa < 255).

30        036         1E         RS    Designates character print mode.

31        037         1F         US    Designates double-width print mode.


NOTES: Positions are numbered from 1 to 480. "hl" is the least significant.
       For dot positions from 1-256, use "h" equals 0, "l" equals desired
       dot column-1. For dot positions from 257-480, use "h" equals 1, "l"
       equals desired dot column-10256.
       Not available via "LPRINT", requires programming to bypass TRS-80
       Printer software. See note on Page 17.

(tlc/tmc-06/13/95)

Privacy Policy