Lexmark Printer
(260-2979)        Installing the Printer Driver       Faxback Doc. # 33627

System Requirements:

To run the Setup Program successfully, make sure you:
  * Are running Windows 3.1 (or higher), Windows for Workgroups 3.10 (or
    higher), or Windows 95 in enhanced mode.
  * Have a 386 or faster PC compatible personal computer.
  * Have approximately 5MB of free space on your hard drive.
  * Have 4MB (or more) of RAM.

Run the Setup Diskette

For help during installation, choose the Help button on the dialog boxes,
or press the F1 key.

To run the Setup Program, complete all of the steps in this document, as
follows:

  1. Start Windows

  2. Make sure the printer is on.

  3. Insert the Setup diskette into drive A: (or B:, depending on your
     computer).

  4. In the Windows Program Manager, from the menu bar at the top of the
     screen, choose File, and then choose Run.

     **Note**  Windows 95 users should click the Start button on the Task
     Bar, then choose Run.

  5. In the Command Line box, type:

     A:SETUP (or B:SETUP)

     and then choose the OK button or press <ENTER>.

  6. Follow the instructions on the installation screens.

(BKL-07/02/96)

Privacy Policy