VGM-470  (250-4094)               Safety               Faxback Doc. # 3179

Operate the monitor from the power source indicated on the back of the
cabinet.  using a different power source can cause the monitor to operate
improperly and might damage the monitor.

To ensure safe operation, you must insert the monitor's three-pin plug
into a grounded standard three-pin outlet.

Use only three-wire extension cords that are correctly wired to provide
connection to ground.  Improperly wired extension cords are a major cause
of fatalities.

The fact that the equipment operates satisfactorily does not ensure a
grounded power point or a completely safe installation.  For your safety,
consult with a qualified electrician if there is any doubt about the
effective grounding of the power point.

To prevent a fire or electric shock, do not overload wall outlets and
extension cords.

Adjust only those controls that are described in the section "Adjusting
the Display" (Faxback # 3177).  Improper adjustment of other controls can
result in damage that will require the service of a technician.

Do not allow anything to rest on the power cord.  The cord should not
stretch across a hall or any other high-traffic area.

Unplug the monitor from the AC outlet if you do not plan to use it for
an extended period of time, such as during a weekend or vacation.

To prevent electric shock and other hazards, do not remove the monitor's
back cover.

Do not drop or push objects into the cabinet openings.  Some internal
parts carry hazardous voltage, and contact with these parts can result in
electric shock.

Never spill a liquid of any kind on the monitor.  If liquid is
accidentally spilled on the monitor, unplug it and have it checked
by a Radio Shack service technician before using it again.


(LB/all-08/22/94)

Privacy Policy