Lexmark Printer
(260-2979)        Clean the Nozzles and Contacts      Faxback Doc. # 19093

If print quality does not improve after repeating the nozzle test, the
problem may be caused by dried ink on the print cartridge nozzles.

1. Remove the print cartridge.  See "Replace Print Cartridges," Faxback
   Doc. 19099 for instructions on removing a print cartridge.

2. Use a clean cloth, dampened with water only, to gently clean the entire
   copper colored area, including the nozzles and contacts.

   When cleaning the color print cartridge, wipe the nozzles in one
   direction so the colors do not mix.
   To dissolve any dried ink, hold the damp cloth against the nozzles for
   about three seconds.  Gently blot and wipe dry.

3. Allow the copper colored area to dry.

4. Reinstall the print cartridge and repeat the nozzle test.

5. If the line is still broken, clean the print cartridge carrier contacts
   in your printer.  Perform the steps listed in "Cleaning Carrier
   Contacts," Faxback Doc. 19091.


(BKL-02/14/96)

Privacy Policy