Citizen PROjet II  (260-2957)  Memory Card Insertion   Faxback Doc. # 14713

WARNING:  Always insert/remove the memory card with the printer switched
          off.  Insertion/removal with the printer switched on and/or
          operating will cause a hardware reset and the risk of damaging
          the printer and the memory card.

Memory cards can be inserted in the covered slot on the right-hand side of
the printer behind the operator console.

    Remove the cover from the card slot.

    Insert the memory card so that the symbol is pointing down on the
    label, indicating the insertion direction, is facing outwards.

    Push the memory card down into the slot until it snaps into the
    connector on the motherboard and then replace the slot cover.

Do not force the card into the printer.  If the card does not insert
smoothly, check that it is compatible with your printer, and that you
are inserting it correctly.


(LB/all-04/21/95)

Privacy Policy