Citizen PROjet II 260-2957 Changing the Ink Jet Print Head

Citizen PROjet II  (260-2957)    Changing the Ink Jet  Faxback Doc. # 14705
                                     Print Head

If dots or lines are not printed completely, remove the ink jet print head
completely and reinsert it, or execute the print head cleaning and/or
PRIME operation.

When the ink detection feature signals an "end of ink" situation (ON LINE
LED flashes slowly), you must either replace the ink cartridge or, if
necessary, change the entire print head.

CAUTION:  ALWAYS use Citizen Ink Jet Print Heads and Ink Cartridges.


(LB/all-04/21/95)